Sika Everbuild Anchorset Chemical Anchor Resin Mixing Nozzle METONOZ4

Product Details: Brand: Everbuild | Manufacturer: Sika | Range: Anchorset | Product Type: Chemical Anchor Resin Mixing Nozzle | Compatibility: Anchorset 150ml, 300ml and 380ml Cartridges | Product Code: METONOZ4 | SKU: 489048 | MPN: METONOZ4 | Sika Code: 489048 | EAN: 5029347913014

The METONOZ4 nozzle is used when dispensing compatible Everbuild Anchorset resin cartridges, helping the resin and hardener combine before the material enters the drilled fixing hole.

The nozzle is useful when carrying out repeat anchoring work, returning to a cartridge after a previous application, or replacing a nozzle that has become blocked with cured resin. It supports correct resin and hardener mixing before the material is applied into drilled holes for anchor fixing work.

Where This Mixing Nozzle Fits

This nozzle is a small but important accessory for chemical anchor resin work. It is not the resin itself. It is the replaceable mixing nozzle used to dispense compatible resin from the cartridge.

• Replacing used or blocked chemical anchor resin nozzles.
• Dispensing compatible Everbuild Anchorset resin cartridges.
• Helping mix two-part resin and hardener during application.
• Keeping spare nozzles available for repeat fixing jobs.
• Use with Anchorset 150ml, 300ml and 380ml cartridges.
• Suitable for trade, maintenance and DIY anchoring work where compatible resin cartridges are used.

Why Choose This Single Nozzle

Choose this single nozzle when only one replacement is needed, or when a cartridge needs to be used again after the previous nozzle has cured or blocked. It is a low-cost spare part for keeping compatible chemical anchor cartridges usable during small jobs, one-off repairs or short fixing tasks.

For repeat resin work, multiple fixing sessions or trade use, a box of nozzles may be more practical. For one cartridge or one small job, this single replacement nozzle avoids buying more accessories than needed.

Key Performance Benefits

• Compatible With Key Anchorset Sizes: Designed for Everbuild Anchorset 150ml, 300ml and 380ml cartridges.
• Supports Correct Mixing: The internal mixing design helps combine resin and hardener as the product is dispensed.
• Useful Spare Part: Handy when the old nozzle has cured, blocked or been used on a previous application.
• Single Nozzle: Sold individually for small jobs, one-off replacements and occasional use.
• Helps Reduce Waste: Allows a compatible cartridge to be used again where resin remains in the cartridge but the previous nozzle can no longer be used.
• Trade And DIY Use: Suitable for professional and DIY users working with compatible chemical anchor resin cartridges.

How To Use This Mixing Nozzle

Always check the resin cartridge, nozzle fit and product instructions before use. The nozzle must be fitted securely so the two-part resin can pass through the internal mixing section properly.

• Step 1: Check that the nozzle is compatible with the resin cartridge being used.
• Step 2: Remove the old or blocked nozzle from the cartridge if one is fitted.
• Step 3: Attach the new mixing nozzle securely to the cartridge.
• Step 4: Load the cartridge into the correct applicator gun for the resin size.
• Step 5: Dispense a small amount first and discard it until the resin appears evenly mixed and uniform in colour.
• Step 6: Apply the resin following the chemical anchor resin instructions.
• Step 7: Replace the nozzle with a new one if resin cures inside after use.

When This Product Is Not The Best Fit

This product is only a spare mixing nozzle. It is not a chemical anchor resin cartridge, applicator gun, fixing stud, threaded rod or drilled hole cleaning tool.

• Do not use as resin: This is the nozzle only and does not include chemical anchor resin.
• Check cartridge fit first: It is designed for Everbuild Anchorset 150ml, 300ml and 380ml cartridges. Check compatibility before using it with other resin tubes.
• Use a new nozzle when blocked: If resin has hardened inside the nozzle, do not force it through. Fit a replacement nozzle.
• Use the correct applicator gun: The nozzle must be used with a compatible cartridge and the correct resin applicator gun.
• Follow the resin instructions: Hole size, drilling depth, cleaning method, fixing type and curing times depend on the chemical anchor resin being used.

Technical Notes

• Use with compatible Everbuild Anchorset 150ml, 300ml and 380ml resin cartridges.
• Fit the nozzle securely before dispensing resin.
• Dispense and discard the first resin until the colour appears even and fully mixed.
• Replace the nozzle if cured resin blocks the internal mixing path.
• Use the correct applicator gun for the cartridge size being used.
• Always follow the chemical anchor resin technical data sheet and application instructions.

Products To Help With Preparation, Use Or Clean-Up

Use this nozzle with compatible Everbuild Anchorset chemical anchor resin cartridges, including the Everbuild Anchorset Green 150 Chemical Anchor Resin 150ml for smaller fixing jobs and the Everbuild Anchorset Green 300 Chemical Anchor Resin 300ml for general fixing work and repeated anchoring jobs.

Use the correct applicator gun for the cartridge size and make sure a compatible mixing nozzle is fitted before dispensing resin.

For reliable fixing work, drilled holes should be prepared and cleaned according to the chemical anchor resin instructions before resin is applied.

• Specification

  Weight	0.01 kg
  Manufacturer	Sika
  Reference Code	METONOZ4
  Reference Code sika	489048
  Type	Standard Chemical Anchor Nozzle

• Product FAQs

  Q: What is the Everbuild Anchorset METONOZ4 nozzle used for?
  A: It is used to mix and dispense two-part chemical anchor resin from compatible Anchorset cartridges.
  Q: Which cartridge sizes does this nozzle fit?
  A: It is intended for compatible Everbuild Anchorset 150ml, 300ml and 380ml cartridges.
  Q: Is this nozzle sold individually?
  A: Yes. This product is supplied as a single spare replacement mixing nozzle.
  Q: Is this nozzle reusable?
  A: It is generally treated as a single-use nozzle because resin can cure inside the mixer and block the flow.
  Q: Why do I need to discard the first resin from the nozzle?
  A: The first material may not be fully mixed, so dispense and discard until the resin reaches a uniform colour before filling the fixing hole.
  Q: Can this nozzle be used with other resin tubes?
  A: It may fit similar chemical anchor resin tubes, but cartridge compatibility should be checked before use.