Applying Original Patio Jointing Compound
This video guide demonstrates the process of pointing paving using a ready-mixed, air-cured compound. The method offers a cleaner, faster alternative to mixing traditional sand and cement mortar on site. The demonstration begins with surface preparation. Clean the paving surface and verify the joints are dry before starting the task.
The footage highlights specific joint dimensions required for a successful installation. A minimum depth of 25mm and a width of 5mm allow the material to bond correctly with the stone. You must remove all loose debris or organic matter from the gaps. Open the vacuum-sealed foil bag and pour the material in small, manageable piles across the paved area.
The application involves using a soft broom to sweep the granules into the open gaps. Move the brush diagonally at a 45°-degree angle to the paving edges. This technique pushes the granules down without scooping them back out. Work the material until it fully fills the voids to support the slabs.
Once the joints are full, use a pointing tool or striking iron to compact the material. Firm pressure closes air pockets and creates a smooth, professional finish level with the slab profile. Sweep away any remaining dust carefully to prevent staining. The product shown uses Geo-Fix Original Patio Jointing Compound to illustrate this effective jointing technique. The compound hardens upon contact with air, creating a solid joint that resists weed growth.