Applying a Colour Enhancer to Paving
This video demonstrates the process of applying a liquid colour intensifier to natural stone and concrete paving. The primary goal is to seal the surface while bringing out the natural hues of the stone. You will see the immediate difference between untreated and treated areas, highlighting the deepening effect on the paving blocks.
Preparation is the first step shown. The surface must be completely clean and dry before starting work. Dirt, moss, or debris on the stones will prevent the solution from penetrating correctly. The footage indicates that moisture levels in the stone must be low to allow for proper absorption of the liquid treatment. The application method indicates using a low-pressure sprayer for even distribution. A roller or brush is also suitable, depending on the area size.
The video shows the liquid being sprayed consistently over the paving joints and the stones themselves. It is important to apply enough liquid to saturate the surface without leaving large pools of fluid standing. As the fluid soaks into the porous stone, it begins to darken its appearance. This creates a “wet look” finish that remains after drying. The demonstration proves that a single application can significantly alter the aesthetic of the patio.
The example in this video uses this colour-enhancing fluid to illustrate the correct technique. Watching the liquid absorb helps gauge how much product is needed for different stone types. This visual reference aids in understanding the speed at which the product should be applied for a uniform finish.