Silverline Tools F Clamp – 150mm Sliding Bar Clamp Twin Set (590588)

Silverline F Clamp 150mm Sliding Bar Clamp Twin Set

MPN: 590588 | Barcode: 5055058103444

The Silverline F Clamp 150mm Sliding Bar Clamp Twin Set provides strong clamping power with quick-adjust sliding bar design for securing workpieces during assembly, gluing, or fabrication tasks.

Who This Product Is For

These clamps suit home users undertaking DIY projects and woodworkers handling small to medium workshop tasks. They work for those needing secure holding during assembly operations where multiple clamps are beneficial.

The twin set arrangement helps with projects requiring simultaneous clamping of different components or when working on larger assemblies that need stabilisation at multiple points.

Key Features

• Cast-iron jaws: Provide stable clamping for wood and metal materials
• Sliding bar mechanism: Allows quick adjustment for different workpiece sizes
• Soft plastic covers: Protect workpieces from scratches and marks
• Soft-grip handles: Offer comfort and control during extended use
• Twin pack: Includes two clamps for handling multiple components or larger projects

Practical Applications

• Woodworking projects: Secure components for gluing or assembly operations
• Metalworking tasks: Hold metal parts during welding or fabrication work
• DIY projects: General repairs or creative projects around the home or garage
• Furniture assembly: Keep pieces aligned and stable during joining operations
• Small to medium projects: The 150mm length and 50mm jaw depth suit smaller to medium-sized applications

How This Fits Into a Typical Job

These clamps come into use during the assembly phase of projects, after components have been prepared and positioned. They hold workpieces securely while adhesives cure, during welding operations, or while mechanical fasteners are installed.

The sliding bar mechanism allows rapid adjustment between different clamping positions, making them useful for sequential assembly steps where components need temporary stabilisation before permanent joining methods are applied.

How to Use

1. Preparation: Ensure surfaces to be clamped are clean and free of debris
2. Adjusting: Use the sliding bar mechanism to set the clamp to the required position
3. Clamping: Place the clamp over workpieces and tighten the screw handle for firm holding
4. Releasing: Loosen the screw handle and remove the clamp when work is complete

Specifications

• Clamp length: 150mm
• Jaw depth: 50mm
• Material: Cast-iron jaws with sliding bar mechanism
• Pack contents: Twin set (two clamps)
• Handle type: Soft-grip design
• Workpiece protection: Soft plastic jaw covers included

Storage and Maintenance

• Clean clamps after each use to prevent debris buildup and maintain smooth operation
• Store in a dry environment to prevent rust or corrosion
• Check jaw covers periodically for wear and replace if necessary to maintain workpiece protection

Order the Silverline F Clamp 150mm Sliding Bar Clamp Twin Set for securing workpieces during assembly, gluing, or fabrication tasks.

Silverline Tools – Manufacturer’s Guarantee

Your Silverline F Clamp is covered by a 30-day guarantee from the date of purchase against faults in materials or workmanship arising during manufacture. For extended protection, you can upgrade to a Lifetime Guarantee by registering your product online. This must be done to extend your cover. Should a fault occur, any defective goods will be repaired or replaced free of charge.

Register your product online: Silverline Tools Guarantee

• Specification

  Weight	0.7 kg
  Manufacturer	Silverline Tools
  Reference Code	590588
  Type	F Clamp
  Size	150mm x 50mm
  Number of Parts	Twin Pack
  Material	Cast iron, plastic
  Guarantee	Silverline Tools Lifetime Guarantee

• Product FAQs

  Q: Can this clamp set be used for both wood and metal projects?
  A: Yes, the clamps work well on both wood and metal surfaces, making them suitable for tasks like gluing, welding, and general assembly.
  Q: What is the maximum opening size of the clamps?
  A: Each clamp has a maximum opening capacity of 150mm, with a jaw depth of 50mm, making them suitable for small to medium-sized projects.
  Q: Do the clamps protect the workpiece from marks or scratches?
  A: Yes, the jaws have soft plastic covers that help protect your materials from damage while maintaining a firm grip.
  Q: Are the clamps easy to adjust during work?
  A: The sliding bar mechanism allows quick and smooth adjustments, so you can reposition the clamps without slowing down your project.
  Q: Is this set supplied as a single clamp or a pair?
  A: This is a twin pack, meaning you receive two clamps, which is helpful when working on larger assemblies or holding multiple components at once.
  Q: How should I maintain these clamps for long-term use?
  A: Clean them after each project, store them in a dry place to prevent rust, and replace the jaw covers if they become worn.