Sika Sikafloor 360 Level Fibre 20kg Self Levelling Compound (861772)

Sika Sikafloor 360 Level Fibre 20kg

MPN: 861772 | Barcode: 7612655156327 | Size: 20kg Bag | Colour: Grey

This 20kg bag is designed for levelling uneven internal floors where a smooth, stable base is needed before installing floor coverings. Its fibre-modified, cement-based formula levels from 3mm to 60mm in a single application, making it suitable for both general floor preparation and underfloor heating projects.

Key Performance Benefits

• Wide Depth Range: Levels floors from 3mm to 60mm in one application.
• Underfloor Heating Approved: Suitable for embedding heating pipes and cables.
• Fast Turnaround: Typically walkable after around 4 hours and ready to overlay after approximately 8 hours, depending on conditions.
• No Separate Latex Required: Powdered polymer is already included in the mix.

Typical Applications

• Levelling uneven concrete floors before tiles, vinyl, or other finishes.
• Preparing sand and cement screeds for floor coverings.
• Embedding underfloor heating systems.
• Internal subfloor preparation over suitable, correctly prepared surfaces.

Quick Application Guide

Ensure the substrate is clean, dry, sound, and free from dust, grease, and loose material before application.

• Priming: Prime the substrate correctly and apply the leveller while the primer remains tacky.
• Mixing: Add the powder to 3.4 litres of clean water and mix with a slow-speed paddle until smooth.
• Application: Pour onto the floor and allow the compound to flow before lightly trowelling to the required depth.
• Drying: Allow to set before foot traffic or overlaying, with drying times depending on temperature and site conditions.

Helpful Tools

For smooth mixing and application, use a power mixer and a mixing bucket to achieve a consistent, lump-free finish.

This self-levelling compound is widely used for fast, reliable floor preparation where a smooth internal subfloor is needed before applying the final floor covering.

• Specification

  Weight	20 kg
  Brand	Sikafloor
  Manufacturer	Sika
  Reference Code sika	861772
  Type	Fibre reinforced Self Levelling Compound
  Size	20kg Bag
  Colour	Grey

• Product FAQs

  Q: Can this levelling compound be applied in a single layer up to full depth?
  A: Yes, it can be applied from 3mm up to 60mm in a single application, making it suitable for correcting uneven floors without multiple layers.
  Q: Is this suitable for use over underfloor heating systems?
  A: Yes, it is approved for embedding underfloor heating pipes and cables, helping create a smooth and stable base before installing floor coverings.
  Q: How quickly can work continue after application?
  A: Under normal conditions, it is typically walkable after around 4 hours and ready to receive floor coverings after approximately 8 hours, depending on temperature and site conditions.
  Q: Do I need to add a separate latex or bonding liquid?
  A: No, the product contains a powdered polymer blend, so only clean water is required for mixing.
  Q: What happens if the surface is not primed correctly?
  A: Poor or incorrect priming can lead to reduced adhesion, uneven curing, or surface defects. Always ensure the correct primer is used and applied properly before laying the compound.
  Q: Can this be left as the finished floor surface?
  A: No, this product is designed as a levelling underlayment and must be covered with a suitable floor finish such as tiles, vinyl, or other coverings.

• Downloads

  Sika Sikafloor 360 Level Fibre Safety Data Sheet (861772)
  Sika Sikafloor 360 Level Fibre Technical Data Sheet (861772)