Sika Sikafloor 132 Self Levelling Compound 16kg 767210

Sika Sikafloor 132 Self Levelling Compound 16kg

MPN: 767210 | Barcode: 7612895935782

Sika Sikafloor 132 is a rapid setting self levelling compound designed to smooth and level internal subfloors before applying final floor coverings such as tiles, vinyl, laminate or carpet. It provides a flat, even surface with strong adhesion to concrete and screed substrates.

The formulation delivers fast drying performance, allowing foot traffic and floor covering installation within a short time frame. Suitable for domestic and commercial environments, it supports efficient floor preparation where reduced downtime is required.

This self levelling compound produces a smooth finish with low shrinkage and high strength, helping improve the final surface quality prior to floor installation. It is suitable for use with most common rigid subfloors and can be overlaid in as little as 45 minutes under normal conditions.

What This Product Is Used For

This product is used to prepare and level internal floors before installing floor finishes.

• Levelling uneven concrete and screed subfloors.
• Preparing surfaces before tiling, vinyl or carpet installation.
• Floor preparation in kitchens, bathrooms and commercial areas.
• Use with underfloor heating systems once cured.

Key Performance Benefits

• Rapid Setting: Walkable in approximately 30 minutes.
• Smooth Finish: Creates an even surface ready for coverings.
• Strong Adhesion: Bonds to concrete and screed substrates.
• Low Shrinkage: Reduces cracking and surface defects.

Why Choose This Self Levelling Compound

This product is selected where fast turnaround floor preparation is required. It allows flooring work to continue the same day while maintaining a smooth and consistent surface.

Compared to standard levelling compounds, this rapid setting formula reduces waiting time and improves efficiency on both small and large flooring projects.

How It Fits Into The Job

This product forms part of the floor preparation stage:

• Step 1: Clean and prepare the subfloor.
• Step 2: Apply a primer where required to improve adhesion.
• Step 3: Mix and apply the compound, allowing it to level and cure.

Quick Use Guide

Mix with clean water using a mechanical mixer and apply evenly across the prepared surface.

• Application Thickness: 2mm to 10mm.
• Coverage: Approx. 3m² at 3mm thickness.
• Walkable: Around 30 minutes depending on conditions.
• Flooring: Install coverings once fully dry.

Compatible Products

This product is commonly used with a Sika bonding agent for priming and improving adhesion and a power mixer for consistent mixing and application.

• Specification

  Weight	16 kg
  Brand	Sikafloor
  Manufacturer	Sika
  Type	Self levelling Compound rapid setting
  Size	16kg
  MPN	767210

• Product FAQs

  Q: What is this product used for?
  A: It is a rapid setting self levelling compound used to smooth and level uneven internal floors before applying final floor coverings such as tiles, vinyl or laminate.
  Q: How thick can it be applied?
  A: It can typically be applied between 2mm and 10mm in a single layer, depending on the substrate and application requirements.
  Q: How long does it take to dry?
  A: It is fast setting and can be walked on in approximately 30 minutes. Floor coverings can be applied after around 45 minutes to a few hours depending on thickness and conditions.
  Q: Can it be used with underfloor heating?
  A: Yes, it is suitable for use with underfloor heating systems once cured. The system should be switched off before and during application.
  Q: What surfaces can it be applied to?
  A: It can be applied to concrete, cement screeds and other solid subfloors, provided they are clean, dry and properly prepared.
  Q: Do I need to prime the floor before applying it?
  A: Yes, priming is recommended to improve adhesion and reduce the risk of air bubbles. Always use a compatible primer in line with the manufacturer’s guidelines.

• Downloads

  Sika Sikafloor 132 Self Levelling Compound Safety Data Sheet
  Sika Sikafloor 132 Self Levelling Compound Technical Data Sheet