Sika Sikafloor 122 Self Levelling Compound – 20kg, 45 Bag Pallet (813560-45)

Sika Sikafloor 122 Self-Levelling Compound 20Kg – 45 Bag Pallet Deal

MPN: 813560-40

Barcode: 5055047206316

Sika Sikafloor 122 is a cement-based self-levelling compound for creating smooth, even surfaces on interior floors, supplied in a 45 x 20kg bag pallet deal for large-scale projects.

Who This Product Is For

This product is intended for trade professionals and flooring contractors working on commercial projects or large residential renovations. The 45-bag pallet quantity makes it suited for substantial floor areas where bulk purchasing offers practical advantages.

It is appropriate for jobs requiring preparation of subfloors before installing final floor coverings such as carpets, tiles, vinyl, or laminate. Those working with underfloor heating systems will find it compatible for creating an even base.

Key Features

• Self-Levelling Performance: Creates a smooth surface with reduced preparation time.
• Fast Drying: Ready for foot traffic within 2-4 hours at 20°C.
• Broad Compatibility: Suitable for use on concrete, sand/cement screeds, quarry tiles, terrazzo, and ceramics.
• Feather-Edge Finish: Smooths down to a fine edge for a level base.
• Underfloor Heating Compatible: Works with modern heating systems.
• Reduces preparation time with its straightforward application.
• Provides a stable foundation for various flooring types.
• Rapid drying helps minimise waiting periods between stages.
• Offers good coverage for extensive projects.

Practical Applications

This product is used for levelling uneven indoor floors, preparing surfaces for carpets, vinyl, or laminate, and creating a smooth base for tiled areas. Its compatibility with underfloor heating systems supports even heat distribution, making it suitable for both residential and commercial environments. It can be used in new builds or renovation projects.

How This Fits Into a Typical Job

This self-levelling compound is applied during the surface preparation phase, after the substrate has been cleaned and repaired but before the final floor covering is installed. It creates a flat, level base that ensures proper adhesion and appearance of the finished flooring material.

The typical workflow involves substrate preparation, mixing and application of the compound, allowing it to self-level and dry, then proceeding with installation of the chosen floor covering once the surface is ready.

How to Use

1. Surface Preparation:
   • Make sure the substrate is clean and free from dust, grease, and loose debris.
   • Repair any significant cracks or holes before application.
2. Mixing:
   • Combine the compound with clean water following the manufacturer’s recommended ratios.
   • Use a paddle mixer for consistent results and avoid lumps, mixing in a 25L mixing bucket for easy handling.
3. Application:
   • Pour the mixture onto the prepared surface and spread evenly using a trowel or float.
   • Allow the compound to settle naturally, self-levelling into an even layer.
4. Drying Time:
   • Leave the surface to dry for 2-4 hours at standard room temperature (20°C). Provide good ventilation during this period.
5. Finishing:
   • Once fully cured, the surface is ready for the installation of your chosen floor covering.

Specifications

• Product type: Cement-based self-levelling compound
• Pack size: 45 x 20kg bags (pallet deal)
• Coverage: Refer to manufacturer’s technical data sheet for coverage rates
• Drying time: 2-4 hours at 20°C for foot traffic
• Compatible substrates: Concrete, sand/cement screeds, quarry tiles, terrazzo, ceramics
• Suitable for: Interior floors, underfloor heating systems
• Finish: Feather-edge capable

Storage and Maintenance Tips

• Store in a cool, dry place away from direct sunlight to preserve product integrity.
• Keep bags sealed until use to prevent moisture contamination.
• Dispose of unused material responsibly, following local guidelines.

Not Suitable For

• Exterior applications or areas exposed to weather
• Substrates not listed in the compatibility section
• Areas with excessive moisture or waterproofing requirements without additional preparation
• Use as a wearing surface without additional floor covering

Order the Sika Sikafloor 122 today for levelling surfaces in your flooring projects. This solution can be used in residential renovations or commercial developments.

• Specification

  Weight	1000 kg
  Reference Code	SKLEV2020-45
  Size	20kg Bag x 45
  Number of Parts	45 bag pallet deal
  Manufacturer	Sika

• Product FAQs

  Q: What is the purpose of this product?
  A: It is a self-levelling compound designed to create a smooth and even surface on interior floors, providing a stable base for floor coverings such as tiles, carpets, and laminate.
  Q: Can this product be used with underfloor heating systems?
  A: Yes, it is fully compatible with underfloor heating, ensuring efficient heat distribution while maintaining structural integrity.
  Q: How long does it take for this product to dry?
  A: The compound is ready for foot traffic within 2–4 hours at 20°C, though drying times may vary depending on environmental conditions.
  Q: What surfaces can this product be applied to?
  A: It can be used on concrete, sand/cement screeds, quarry tiles, terrazzo, and ceramic surfaces, making it highly adaptable for different flooring substrates.
  Q: How much area does one bag cover?
  A: A single 20kg bag covers approximately 4 square metres at a thickness of 3mm, though coverage may vary based on surface conditions.
  Q: What are the storage requirements for this product?
  A: Store in a climate-controlled environment, away from direct sunlight and moisture, to maintain its quality before use.

• Downloads

  Sika Sikafloor 122 Floor Level Safety Data Sheet
  Sika Sikafloor 122 Floor Level Technical Data Sheet
  Sika Sikafloor 122 Floor Level Declaration Of Performance