Sika Black Jack 901 Solvent-Based Black Bitumen Paint 1 Litre 90101 852657
In stock
Sika Black Jack 901 Black Bitumen Paint 1 litre is a solvent-based black coating for small repair areas, touch-in work and single-item maintenance on prepared metal, concrete, felt, timber, brick and stone surfaces.
All Size Options:
5000 in stock
Description
Product Details: Brand: Sika | Product Type: Solvent-Based Black Bitumen Paint | Size: 1L | Product Code: 852657 | MPN: 90101 | Barcode: 5029347009113
Sika Black Jack 901 Black Bitumen Paint is a solvent-based, full-bodied black bituminous paint for protective coating work. Once dry, it forms a black film suitable for metal protection, overcoating wood and felt, and protecting suitable building surfaces against water, weathering and corrosion.
The 1L tin is practical for smaller repair areas, touch-in work, single-item maintenance and controlled application where a larger tin is not required. It is suitable for trade users, maintenance teams and competent DIY users working on prepared metal, concrete, stone, brick, felt and timber surfaces.
What This Product Is Used For
This bitumen paint is used where a black protective coating is needed on suitable exterior or building maintenance surfaces.
- Protecting iron, steel, lead, zinc and aluminium surfaces.
- Coating gutters, downpipes, railings, gates, ladders and similar metalwork.
- Protecting concrete structures, stone, brick, concrete screeds and sand/cement surfaces.
- Overcoating suitable felt and wood surfaces.
- Small maintenance jobs where a 1L tin gives better control and less waste.
Key Performance Benefits
- Forms a waterproof and weatherproof black protective coating when dry.
- Provides corrosion-resistant protection for suitable metal surfaces.
- Suitable for use on many common building surfaces when correctly prepared.
- Fast-drying formulation, with drying time dependent on site conditions.
- Supplied as a ready-to-use coating and should not be thinned.
Why Choose This Solvent-Based Black Bitumen Paint
Choose this 1L bitumen paint when the job needs a smaller tin for targeted maintenance, patch protection or coating individual components rather than covering large areas. It is a good fit for prepared metalwork, minor roofing maintenance, felt overcoating and small masonry protection tasks where a black bituminous finish is required.
It should not be used for potable drinking water tanks or in areas where later solvent contact is likely. Bitumen paint may bleed through paints applied over it, so always check compatibility and follow the manufacturer guidance before overpainting.
How It Fits Into The Job
Use this product after the surface has been cleaned, dried and checked for suitability.
- Step 1: Remove dirt, dust, grease, loose material, loose paint and visible rust from the surface.
- Step 2: Stir the paint thoroughly, then apply by brush or suitable spray equipment without thinning.
- Step 3: Allow the first coat to dry before applying a second coat, then clean tools before the bitumen paint sets.
Quick Use Guide
Good preparation is important because bitumen paint needs a dry, stable and clean surface to bond correctly.
- Surfaces must be dry, stable and thoroughly cleaned before application.
- Apply a minimum of two coats and allow sufficient drying time between coats.
- Clean tools immediately after use with Sika Wonder Wipes or white spirit.
- Prime porous cement-based surfaces where required and test compatibility before use.
Safety: Wear suitable gloves and eye protection when carrying out small repair, touch-in or single-item coating work. Use only with good ventilation, avoid breathing vapours, keep the product away from heat, sparks, open flames and other ignition sources, and dispose of waste, wipes and empty containers in line with local regulations.
Please note: As this product is supplied in a tin, minor dents can occur during transit. A dented tin is not classed as a product fault and is not a reason for return, provided the contents remain sealed and usable. Please avoid ordering tinned products if minor transit dents are likely to be an issue.
Important: Always read the Technical Datasheet before first use to confirm the product is suitable for your surface, preparation method and intended application.
Compatible Products
For small repair areas, touch-in work and single-item maintenance, use suitable clean-up products to remove uncured bitumen paint from hands, tools and surrounding surfaces before it hardens.
-
Specification
Weight 0.45 kg Brand Black Jack
Manufacturer Sika
Reference Code 90101
Reference Code sika 852657
Type Bitumen Paint
Size 1 Litre
-
Product FAQsQ:
What is Sika Black Jack 901 Black Bitumen Paint used for?
A:It is used as a black protective coating for waterproofing, weatherproofing and corrosion-resistant protection on suitable metal, concrete, wood, felt, brick, stone and roofing surfaces.
Q:What size is this Sika Black Jack 901 tin?
A:This product is supplied in a 1 litre tin.
Q:When should I choose the 1 litre size?
A:Choose the 1 litre tin for small coating jobs, local repairs and maintenance work where a larger tin is not required.
Q:Can Sika Black Jack 901 be applied to wet surfaces?
A:No. The surface should be dry, stable and free from water, ice, dirt, dust, grease and loose material before application.
Q:How many coats are recommended?
A:The technical guidance recommends a minimum of two coats with drying time allowed between coats.
Q:Can this bitumen paint be used for drinking water tanks?
A:No. It should not be used for potable drinking water tanks.
-
Downloads
You May Also Like
- Rubber-Enriched DPM Waterproof Barrier
- Low-Odour Indoor Application
- Multi-Purpose Coating and Adhesive
- High Wipe Count
- No-Water Cleaning
- Antibacterial Protection
- Rubber-Enriched Waterproof DPM Formula
- Bonds to Masonry, Brick, Concrete, Wood, Tiles, and Polystyrene
- Suitable for Indoor and Outdoor Use
- No Water Required
- Textured Cleaning Surface
- Strong Cleaning Action