Scan Reusable P3 Half Mask Respirator Kit with Twin Filters XMS26MASK

Product Details: Product: Scan Reusable P3 Half Mask Respirator Kit | SKU: XMS26MASK | Product Code: XMS26MASK | MPN: SCARESPHMP3 | GTIN / EAN: 5023969017594

The Scan P3 half-mask kit is designed for jobs where airborne particles are generated, including sanding, grinding and other dusty site tasks. The reusable mask covers the nose and mouth, while the twin P3 cartridges attach using bayonet-style twist-and-clip fittings for straightforward fitting and replacement.

Real Deals For You: This XMS product is part of the Real Deals For You promotional range, bringing together selected trade and DIY products in the seasonal XMS offer.

Best For Dust, Mist and Fine Particle Work

Suitable for woodworking, sanding, grinding, metalworking, construction and other tasks where appropriate P3 particle protection is required.

Why Choose This Scan P3 Respirator Kit

• Supplied with two P3 particle cartridges.
• Supplier-stated 99.95% particle filtration performance.
• Bayonet twist-and-clip fittings make cartridge changes straightforward.
• Adjustable elastic straps help achieve a secure fit.
• Storage bag included for keeping the mask protected between uses.

How To Fit and Use

• Inspect the mask body, straps and cartridges for damage before use.
• Twist each P3 cartridge into the bayonet fitting and secure it in place.
• Position the mask over the nose and mouth and adjust the straps.
• Check the facial seal every time the respirator is put on.
• Leave the work area before removing the mask, then store it clean and dry in the supplied bag.

Important Respiratory Protection Information

P3 filters are particle filters. They are not suitable for gases or vapours unless an appropriate gas or combination filter is specified for the hazard. The source listing states conformity to EN 140:1998 for the half mask and EN 143:2021 for the particle filters. Effective protection depends on correct filter selection and a proper facial seal. Workplace users of tight-fitting respiratory protective equipment may require face-fit testing, and facial hair in the sealing area can reduce protection.

Care and Storage

Remove the cartridges before cleaning the mask body. Keep the filters dry, avoid solvents, and store the respirator clean and dry away from direct sunlight and chemicals. Replace filters if they become damaged, heavily soiled or breathing resistance increases.

What’s Included

• 1 x Reusable half-mask respirator
• 2 x P3 particle cartridges
• 1 x Storage bag

• Specification

  Weight	0.25 kg
  Brand	Scan
  Product Type	Reusable Half Mask Respirator
  Filter Class	P3
  Included Filters	2 x P3 Particle Cartridges
  Particle Filtration	99.95% Supplier-Stated
  Filter Fitting	Bayonet Twist-and-Clip
  Straps	Adjustable Elasticated
  Mask Coverage	Nose and Mouth
  Mask Standard	EN 140:1998
  Filter Standard	EN 143:2021
  Colour	Red and Black
  Storage Bag Included	Yes

• Product FAQs

  Q: Are P3 filters included with this respirator? Included Filters
  A: Yes. The kit is supplied with two P3 particle cartridges.
  Q: What filtration rating do the included P3 filters have? Filtration Rating
  A: The source product information states a 99.95% particle filtration rating for the included P3 cartridges.
  Q: What type of work is this respirator suited to? Suitable Work
  A: It is intended for particle-producing tasks such as sanding, grinding, woodworking, metalworking and general dusty site work, provided P3 particle protection is appropriate for the hazard.
  Q: Do P3 filters protect against gases and solvent vapours? Gas and Vapour Protection
  A: No. P3 filters are particle filters. Gases and vapours require the correct gas or combination filter for the specific hazard.
  Q: How are the cartridges fitted? Cartridge Fitting
  A: The cartridges use bayonet twist-and-clip fittings. Check that each cartridge is securely fitted before use.
  Q: Do I need to check the mask seal? Seal Check
  A: Yes. A tight-fitting half mask depends on a proper facial seal. Check the seal each time the respirator is put on and reposition it if air leaks around the edges.
  Q: Can facial hair affect the seal? Facial Hair
  A: Yes. Facial hair or stubble in the sealing area can prevent a tight fit and reduce the protection provided by a tight-fitting respirator.
  Q: How should the mask and filters be stored? Storage
  A: Keep the filters dry and store the respirator clean and dry in the supplied storage bag, away from direct sunlight and chemicals.