Roughneck Gold Gorilla Pry & Wrecking Bar Twin Pack 14in & 22in XMS26GOLDBAR

Product Details: Product: Roughneck Gold Gorilla Pry & Wrecking Bar Twin Pack 14in & 22in | SKU: XMS26GOLDBAR | Product Code: XMS26GOLDBAR | MPN: 94-402 | GTIN / EAN: 5057902944029

The Roughneck Gold Gorilla Bar Set gives you two practical lengths for demolition, strip-out, renovation and carpentry work. The shorter 14in bar is suited to tighter spaces and more controlled work, while the 22in bar provides extra reach and leverage where materials are harder to move.

Real Deals For You: This XMS product is part of the Real Deals For You 2026 – Get Kitted Out promotional range.

Best For Demolition, Renovation and Timber Strip-Out

Use the set for lifting floorboards, removing skirting and architrave, separating timber joints, stripping out framing and pulling exposed nails and fixings from suitable materials.

Why Choose This Roughneck Gorilla Bar Set

• Twin pack with 14in (356mm) and 22in (558mm) bars.
• Two lengths for close work and increased leverage.
• Low-profile working ends for getting beneath boards, trim and timber components.
• Wide claws for prying, levering and lifting.
• Nail-pulling capability for exposed fixings.
• Gold powder-coated finish for durability and easy identification.
• Suitable for builders, carpenters, joiners, renovators and DIY users.

Where It Can Be Used

• Floorboard lifting and removal.
• Skirting and architrave removal.
• Timber framing and strip-out work.
• Door lining and trim removal.
• Carpentry repairs and timber joint separation.
• General demolition and renovation work.

How To Use

• Choose the shorter or longer bar according to the available space and leverage required.
• Insert the low-profile working end beneath the material being lifted.
• Apply pressure gradually rather than using sudden uncontrolled force.
• Use the longer bar where additional leverage is required.
• Position the claw securely around a nail before pulling.
• Work progressively along longer boards or trim rather than forcing one point excessively.
• Protect finished surfaces with a suitable packing piece where marks would be a concern.
• Keep hands and fingers clear of the levering area.

Care and Safe Use

Wipe dirt, plaster and debris from the bars after use and store them somewhere dry. Check the claws and working ends for damage or excessive wear before use. Do not use a damaged or badly deformed bar, avoid use on live electrical equipment, and do not strike or extend the bars in ways they were not designed for.

• Specification

  Weight	1.834 kg
  Brand	Roughneck
  Range	Gorilla Bar
  Product Type	Wrecking / Pry Bar Twin Pack
  Pack Quantity	2 Bars
  Small Bar Length	14in / 356mm
  Large Bar Length	22in / 558mm
  Working End	Low Profile
  Claw	Wide
  Functions	Prying, Levering, Lifting and Nail Pulling
  Finish	Gold Powder Coated
  Colour	Gold
  Suitable For	Demolition, Renovation, Carpentry, Joinery and General Strip-Out Work

• Product FAQs

  Q: What sizes are included in the Roughneck Gold Gorilla Bar Set? Bar Sizes
  A: The set includes one 14in / 356mm bar and one 22in / 558mm bar.
  Q: When should I use the shorter 14in bar? Short Bar Use
  A: The 14in / 356mm bar is useful where access is limited or where more control is needed, such as removing skirting, architrave, trim or smaller boards.
  Q: What is the longer 22in bar best for? Long Bar Use
  A: The 22in / 558mm bar provides extra reach and leverage for more resistant boards, framing and other timber components.
  Q: What is the advantage of the low-profile working ends? Low-Profile Ends
  A: The low-profile ends can enter smaller gaps beneath boards, trim and timber components before leverage is applied.
  Q: Can these bars be used to remove nails? Nail Removal
  A: Yes. The wide claw can be used to pull suitable exposed nails and fixings as well as for prying and lifting.
  Q: Can they be used for floorboard and skirting removal? Floorboards and Trim
  A: Yes. The two lengths are useful for lifting floorboards and for easing skirting, architrave and other trim away during renovation work.
  Q: Why use a packing piece behind the bar? Surface Protection
  A: A suitable protective packing piece can help spread the load and reduce marking on finished surfaces while providing a controlled fulcrum.
  Q: How should I care for the bars after use? Care and Storage
  A: Wipe away dirt, plaster and debris, keep the nail-pulling slots clean, inspect the claws and working ends for damage, and store the bars somewhere dry.