Ronseal One Coat Damp Seal White Paint 2.5L for Wall Sealing (36958)

Ronseal One Coat Damp Seal White Paint 2.5 Litre

MPN: 36958

Barcode: 5010214869589

A purpose-made sealant designed to tackle damp stains on interior walls and ceilings while allowing trapped moisture to evaporate.

Who This Product Is For

This product is for homeowners, property managers, and DIYers dealing with damp stains on interior surfaces. It suits those addressing minor to moderate damp patches in living rooms, bedrooms, kitchens, and bathrooms where redecorating is planned after treatment.

Key Features

• Moisture Control: Blocks damp stains while allowing trapped moisture to escape, preventing further damage.
• Direct Application: Can be applied straight onto damp walls and ceilings.
• Quick Drying: Becomes touch-dry in 2 hours and ready for decorating in 4 hours.
• Usage: Suitable for bare or previously painted interior walls and ceilings.
• Paintable Surface: Provides a base for painting or wallpapering.

Practical Applications

This sealant tackles damp-related challenges in living rooms, bedrooms, kitchens, and bathrooms. It provides protection and a smooth surface for redecorating after addressing damp issues. The formulation works for homes, rental properties, and renovation projects.

How This Fits Into a Typical Job

After fixing the underlying cause of damp and preparing the surface, this sealant is applied to block stains and allow moisture evaporation. Once dry (typically within 4 hours), it creates a suitable base for painting or wallpapering, completing the damp remediation before redecorating.

Specifications

• Colour: White
• Pack Size: 2.5 Litre
• Drying Time: Touch-dry in 2 hours, ready for decorating in 4 hours
• Surface Type: Interior walls and ceilings
• Surface Condition: Bare or previously painted

How to Use

1. Preparation:
   • Fix the underlying cause of damp before starting.
   • Remove any wallpaper, sand off loose paint, and clean the surface thoroughly. If mould is present, treat it using a mould remover spray.
2. Ventilation:
   • Allow airflow by opening windows and doors. Lay down dust sheets to protect surrounding areas.
3. Application:
   • Stir the sealant thoroughly before use. Apply using a roller kit or brush, keeping coverage even. For small patches, extend the painted area by at least 30cm around the damp spot.
4. Drying Time:
   • Allow the coating to dry for 2 hours. After 4 hours, the surface is ready for painting or wallpapering.
5. Clean-Up:
   • Wash brushes or rollers in warm, soapy water immediately after use to maintain their condition.

Storage and Maintenance

• Store in a cool, dry place away from direct sunlight.
• Seal the tin tightly after each use to prevent the product from drying out.
• Inspect tools before reuse to check they remain in good condition.

Not Suitable For

• Not a substitute for structural repairs to fix the root cause of damp.
• Not intended for exterior surfaces or areas with ongoing water ingress.
• Not designed for use on surfaces that cannot be properly prepared (e.g., heavily contaminated or unstable substrates).

Order Ronseal One Coat Damp Seal today for a solution to tackle damp stains with a straightforward application process.

• Specification

  Weight	2 kg
  Reference Code	RSLOCDSW25L 36958
  Option Text	2.5 Litre
  Colour	white
  Manufacturer	Ronseal

• Product FAQs

  Q: Can this product be used on actively dripping walls?
  A: While it can be applied to damp surfaces, ensure that the area is not excessively wet or dripping. Address the source of water ingress before using the product.
  Q: Is this suitable for outdoor use?
  A: No, this product is designed specifically for indoor walls and ceilings. For external applications, consider products formulated for outdoor conditions.
  Q: Can I apply wallpaper directly after using this?
  A: Yes, you can safely apply wallpaper over the treated area once the sealant is fully dry (after 4 hours).
  Q: What tools are best for applying this sealant?
  A: A roller or brush is best for even application. Choose your tools based on the size of the area being treated.
  Q: Does this replace a damp-proof membrane?
  A: No, this sealant is not a substitute for a damp-proof membrane and should not be used in situations requiring such a solution.
  Q: How many coats are necessary?
  A: As the name suggests, only one coat is typically needed to cover damp stains effectively. However, a second coat may be applied for particularly severe cases.

• Downloads

  Ronseal One Coat Damp Seal Safety Data Sheet.pdf
  Ronseal One Coat Damp Seal Information Sheet.pdf