Joint It – Dynamic 2 Part Resin Paving Jointing Compound Pointing System – 22kg, BUFF NEUTRAL (JID22BUF)

Joint It Dynamic 2 Part Resin Paving Jointing Compound Pointing System 22kg, BUFF NEUTRAL

MPN: JID22BUF

Barcode: 5391535770250

Joint It Dynamic is a two-part resin paving jointing compound for filling joints 5mm or wider in patios, pathways, and driveways, creating weather-resistant, weed-resistant surfaces.

Who This Product Is For

This product is designed for both homeowners undertaking outdoor projects and professional landscapers or paving contractors. It suits those looking for a faster alternative to traditional mortar jointing methods.

The compound is appropriate for residential patios, garden paths, driveways, and commercial paving projects where durable, flexible joints are required.

Key Features

• Two-Part Resin System: Rapid curing delivers weather-resistant joints suitable for high-traffic areas.
• Water Permeable Formula: Prevents standing water and reduces flood risk.
• Easy Sweep-In Application: Quick joint filling reduces installation time compared to traditional mortar.
• Non-Staining Resin Binder: Protects natural stone surfaces from staining.
• Flexible Jointing: Accommodates movement, minimising cracking and weed growth.
• Colour-Matched Sand (Buff Neutral): Provides consistent aesthetics for a professional finish.

Key Benefits

• Reduces jointing time dramatically compared to traditional mortar methods.
• Strong, flexible joints minimise cracking and weed penetration.
• Easy to use without specialist tools.
• The permeable finish prevents puddling and reduces surface water issues.

Practical Applications

The Joint It Dynamic Resin Paving Jointing Compound is effective for patios, garden paths, driveways, public footpaths, and commercial paving projects. It performs well on sandstone, porcelain, granite, limestone, concrete slabs, and similar materials.

How This Fits Into a Typical Job

This compound is used during the jointing phase of paving installation or renovation. After the paving slabs are laid and the surface is cleaned and prepared, the mixed compound is swept into the joints. The process replaces traditional mortar pointing, providing a faster application with immediate water permeability.

Correct usage involves preparing the surface with water or primer, mixing the two-part system, applying with a broom, and cleaning excess before the material sets. The joints then cure over several days while remaining flexible.

Not Suitable For

• Joints narrower than 5mm wide.
• Surfaces that cannot be properly cleaned and saturated before application.
• Use in freezing conditions or on frozen surfaces.

Specifications

• Pack size: 22kg
• Colour: Buff Neutral
• Minimum joint width: 5mm
• Water permeable: Yes
• Initial set time: 4-6 hours
• Foot traffic: Avoid for 24 hours
• Full cure: 30 days (avoid power-washing before this period)

How to Use

1. Preparation: Clean the paving thoroughly, removing dirt and loose debris. Saturate the surface with water. On non-absorbent surfaces apply a bonding slurry first by using a suitable primer like the Joint It Slurry Primer 17kg.
2. Mixing: Thoroughly combine the resin binder (Part A) with the hardener (Part B) in the supplied bucket. Add up to 4 litres of water for optimal flow.
3. Application: Use a broom to firmly sweep the mixed jointing compound into joints, keeping the surface saturated throughout the application.
4. Cleaning: Remove excess material immediately using plenty of water and a soft broom, preventing residue on paving surfaces. For porcelain paving, a porcelain epoxy grout removal scraper helps lift excess without scratching.
5. Drying: Allow 4-6 hours for initial setting. Avoid foot traffic for 24 hours.
6. Final Cure: Full strength is achieved within a few days; avoid power-washing the surface for at least 30 days post-application.

Storage and Maintenance Tips

• Store unopened buckets in a dry, shaded area to maintain product quality.
• Use the full mixed compound immediately; it cannot be stored after mixing.
• Annually inspect and clean surfaces with mild patio cleaners to maintain appearance.

Add the Joint It Dynamic Resin Paving Jointing Compound to your project today for fast, reliable, and professional paving joints every time.

• Specification

  Weight	20 kg
  Dimensions	0.00000000 × 0.00000000 × 0.00000000 cm
  Brand	Dynamic
  Manufacturer	Joint It
  Reference Code	JID22BUF JID22GRE JID22BLA
  Size	22kg
  Colour	Buff Grey Black

• Product FAQs

  Q: What paving materials can this jointing compound be used on?
  A: This compound suits porcelain, sandstone, limestone, granite, and concrete slabs. It also works effectively with other natural stone paving materials.
  Q: Is sealing required before applying this jointing compound to paving slabs?
  A: Sealing porcelain paving is recommended to prevent staining. For limestone and flamed or honed granite slabs, sealing beforehand reduces the risk of residue marks.
  Q: How quickly does this paving jointing compound cure?
  A: The compound begins to set within 4–6 hours and achieves full hardness within a few days. Avoid heavy traffic or washing the area for at least 30 days post-application.
  Q: Can this resin jointing compound be applied in wet conditions?
  A: Yes, the paving surface should remain wet throughout the application. A well-soaked surface ensures proper joint filling and prevents staining or residues.
  Q: Does this product prevent weeds from growing between paving slabs?
  A: The flexible, durable resin formula significantly reduces weed growth by sealing joints, providing lasting protection against weed penetration.
  Q: Can leftover mixed jointing compound be stored for later use?
  A: No, once mixed, the resin begins curing immediately and must be used completely. Any leftover mixture cannot be stored for later applications.