Irwin Vise Grip Locking C Clamp Plier – 6R , 6 Inch (T17EL4)

Irwin Vise-Grip 6-inch Locking C Clamp – Built for Welding, Auto Repairs, and Metalwork

MPN: T17EL4

Barcode: 0038548001715

The Irwin Vise-Grip Locking C Clamp provides controlled clamping in confined spaces for welding, automotive, and metal fabrication tasks.

Who This Product Is For

This clamp suits tradespeople including welders, automotive technicians, and metal fabricators who need reliable holding during fabrication and repair work. It also works for serious DIY users undertaking metalwork or automotive projects at home.

The tool is appropriate for jobs requiring secure positioning of metal components during welding, panel alignment in automotive bodywork, sheet metal shaping, and general assembly tasks where steady pressure is needed.

Key Features

• Nickel-Plated Steel Build: Resists wear and corrosion for long-term use.
• Adjustable Pressure Screw: Allows custom clamping force for accurate control.
• Traditional Release Lever: Enables quick, one-handed release when fully clamped.
• Compact 6-Inch Frame: Fits in confined areas where larger clamps cannot reach.
• Regular Tips: Deliver balanced pressure across surfaces, reducing damage risk.
• Throat Depth of 32mm: Provides firm grip on various shapes and sizes.

Practical Applications

The locking C clamp performs well in welding setups, bodywork repairs, and sheet metal joining. Its compact form provides controlled pressure without affecting holding strength across various materials.

• Welding Fabrication: Holds parts in place during high-heat joins.
• Automotive Panel Alignment: Keeps panels steady for accurate fitting.
• Sheet Metal Work: Applies even pressure for accurate shaping.
• Wood and Metal Assembly: Secures joints while adhesives cure or fasteners are applied.
• General Workshop Use: Useful for holding parts while grinding, drilling, or marking.

Use a magnetic torpedo level to check alignment when fitting panels or adjusting small assemblies.

How This Fits Into a Typical Job

This clamp is typically used during the assembly or repair phase after components have been prepared and aligned. It secures workpieces in position for joining, fastening, or finishing operations.

In a standard workflow, surfaces are cleaned and aligned, the clamp is positioned and locked to apply pressure, the task (welding, drilling, etc.) is performed, then the clamp is released using the lever. The adjustable screw allows fine pressure tuning as needed.

Specifications

• Clamp Size: 6-inch frame
• Throat Depth: 32mm
• Construction: High-grade alloy steel with nickel plating
• Mechanism: Adjustable screw with release lever
• Tip Type: Regular tips for balanced pressure

How to Use

1. Prepare the Surface: Ensure all parts to be clamped are clean, dry, and aligned properly.
2. Set the Clamp Width: Adjust the hex screw to accommodate the material thickness.
3. Position the Clamp: Align the jaws over the target area for balanced pressure.
4. Engage the Locking Mechanism: Squeeze the handles until the clamp locks securely in place.
5. Make Final Adjustments: Fine-tune the pressure using the screw if required.
6. Release Safely: When finished, use the release lever to open the clamp with minimal effort.

Wear suitable work gloves to protect your hands when handling hot or sharp metal during welding, grinding or drilling.

Storage and Maintenance

• Wipe clean after each use to prevent the build-up of debris or metal shavings.
• Store in a dry location to avoid corrosion on moving parts.
• Apply a light lubricant to the screw thread periodically to keep the operation smooth.

Add the Irwin Vise-Grip Locking C Clamp to your toolkit today for controlled clamping in welding, automotive, and general fabrication tasks.

• Specification

  Weight	0.5 kg
  Reference Code	T17EL4
  Option Text	6 inch
  Manufacturer	Irwin Tools

• Product FAQs

  Q: What size materials can this clamp hold?
  A: The jaws open wide enough to grip items up to around 45mm thick, while the 32mm throat depth allows it to hold various shapes securely.
  Q: Is this clamp suitable for use in tight spaces?
  A: Yes, its 6-inch frame is compact enough to fit into confined areas where larger clamps may not work effectively.
  Q: How do you adjust the gripping pressure?
  A: Turn the adjustment screw at the handle to set the grip strength before locking it in place.
  Q: Can it be used for both metal and wood projects?
  A: It works well on both, applying steady pressure without marking most surfaces when positioned correctly.
  Q: What’s the quickest way to release it after use?
  A: Press the release lever on the handle to unlock the jaws in one smooth movement, even when clamped tightly.
  Q: Does it need any maintenance?
  A: A quick wipe after use and occasional lubrication of the screw thread will keep it working smoothly for longer.