Faithfull Trigger Bar Clamp and Spreader – 150mm, 6 Inch, 230kg (FAIBCS6200)

Faithfull Trigger Bar Clamp and Spreader 150mm – Dual-Action Power for Accurate Clamping and Spreading

MPN: FAIBCS6200

Barcode: 5023969316413

The Faithfull Trigger Bar Clamp and Spreader delivers strong clamping and spreading performance in a single, user-friendly tool.

Who This Product Is For

This clamp is for trade professionals and serious DIY users who need clamping and spreading functions for assembly and repair work.

It suits woodworking, metal fabrication, furniture assembly, and general maintenance tasks where holding and alignment are required.

Key Features

• Quick Conversion Mechanism: Instantly switch from clamp to spreader mode without tools, saving time on complex setups.
• One-Handed Operation: Use one hand to operate the clamp, keeping the other free for precise alignment.
• High Clamping Pressure: Delivers up to 230kg of pressure to hold materials securely during demanding tasks.
• Strong Build: Constructed from heavy-duty ABS and a high-tensile steel bar for long-term performance.
• Protective Jaw Pads: Cushioned jaws prevent surface damage, preserving your workpiece integrity.

Key Benefits

• Speeds up tasks by allowing fast adjustments during work.
• Reduces physical strain with convenient trigger control.
• Minimises risk of damage to delicate or finished surfaces.
• Supports both DIY and trade professionals with consistent strength and control.

Practical Applications

The trigger bar clamp and spreader works well for edge gluing timber, assembling cabinets, and positioning metal components. It also performs in light framing tasks and general fixings where steady pressure and alignment are needed.

• Furniture Assembly: Holds parts in position while fasteners are applied or adhesives cure.
• Joinery Work: Useful for securing joints during layout and gluing.
• Metal Fabrication: Maintains alignment of metal parts before welding or bolting.
• Model Making and Craft Work: Offers control on delicate tasks with soft jaw pads.
• Repair Work: Opens panels or holds pieces in place during maintenance jobs.

How This Fits Into a Typical Job

This tool is used during assembly, after components have been cut and dry-fitted, but before adhesives cure or fasteners are installed.

It holds workpieces in alignment while glue sets or while screws, bolts, or welds are applied, so that components stay in position throughout the process.

Specifications

• Product Type: Trigger bar clamp and spreader
• Capacity: 150mm
• Maximum Clamping Pressure: 230kg
• Construction: Heavy-duty ABS body with high-tensile steel bar
• Jaw Pads: Protective cushioned pads
• Operation: One-handed trigger operation with quick conversion between clamp and spreader modes

Usage Instructions

1. Prepare the Surfaces:
   • Make sure the surfaces are clean and free from debris. Position the clamp where needed.
   • Mark reference points before clamping with a precise marking pen such as the MarXman marking pen twin pack.
2. Set the Clamp/Spreader Mode:
   • Use the quick-release head to switch between clamping or spreading functions.
3. Adjust the Position:
   • Slide the moving jaw into place and align it with the workpiece.
4. Apply Pressure:
   • Squeeze the trigger to tighten the clamp until the required pressure is reached.
5. Release Safely:
   • Use the quick-release lever to open the clamp when finished.
6. Check Alignment:
   • Make sure components are held securely and aligned before working further.

Storage and Maintenance Tips

• Wipe the clamp after use to remove any adhesive or dust build-up.
• Store in a dry location to protect the steel components from corrosion.
• Periodically check the trigger and jaw mechanism for smooth operation.

Add the Faithfull Trigger Bar Clamp and Spreader to your kit today and work with greater control and speed on every project. Whether you’re a professional tradesperson or tackling tasks at home, this tool helps you get the job done right.

• Specification

  Weight	0.2 kg
  Reference Code	FAIBCS6200 TSCABCS6200
  Manufacturer	Faithfull Tools

• Product FAQs

  Q: How much clamping pressure does this tool provide?
  A: It can apply up to 230kg of pressure, making it suitable for securing materials firmly during assembly or repair work.
  Q: Can it be used for both clamping and spreading?
  A: Yes, it can switch between clamping and spreading modes quickly without the need for extra tools.
  Q: Is it possible to operate this tool with one hand?
  A: Yes, the trigger mechanism allows you to adjust and secure the jaws while keeping your other hand free.
  Q: Will it damage delicate or finished surfaces?
  A: No, the cushioned jaw pads help protect surfaces from scratches and marks while maintaining a secure grip.
  Q: What size materials can it handle?
  A: It has a maximum jaw opening of 150mm, which suits small to medium-sized workpieces in woodworking, metalwork, and other projects.
  Q: How should I maintain this tool for long-term performance?
  A: Wipe it clean after use, keep it dry to prevent rust, and occasionally check the trigger and jaws for smooth operation.