Faithfull Tools Faithfull 36pc Impact Rated Bit Set 25/50/75mm FAISB36IMP XMS26SBIT36

Product Details: Product: Faithfull 36pc Impact Rated Bit Set 25/50/75mm FAISB36IMP | SKU: XMS26SBIT36| Product Code: FAISB36IMP | MPN: FAISB36IMP | GTIN / EAN: 5023969017662

The Faithfull 36-piece impact-rated set is designed for fastening tasks where extra torque and varied reach are needed. Short bits are suitable for direct chuck driving while the 50mm and 75mm lengths provide access to recessed or awkward fixings. Each bit is marked on the shank and stored in its own tray inside the fitted carry case.

Best For Reach And Impact Driver Work

• Jobs requiring multiple drive types and lengths in one kit.
• Reaching recessed fixings behind joists, in countersinks or tight spots.
• Rapid fastening using impact drivers where higher torque is required.

Why Choose This Faithfull Bit Set

The set is described by the supplier as impact-rated to withstand the hammering torque of impact drivers. Three lengths (25mm, 50mm and 75mm) give choice of reach while the magnetic bit holder assists single-handed positioning and faster bit changes.

Key Benefits

• Impact-rated bits for use with impact drivers.
• Three lengths to suit both close-up and recessed fixings.
• Magnetic bit holder and fitted case for tidy storage.

Where It Can Be Used

Suitable for joinery, decking, maintenance, vehicle and equipment repair, assembly and general fastening where Phillips, Pozidriv, slotted, hex or Torx drives are required and where an impact driver is used.

How To Use

• Select the appropriate drive profile and length for the fixing and access required.
• Fit the short bit directly in the driver chuck for close-up work; use 50mm or 75mm bits to reach recessed positions.
• Use the magnetic bit holder to help retain the screw on the tip during start-up and line-up.

Technical Notes

• Pack contents: 36 pieces including short, mid and long bits plus magnetic bit holder in a fitted carry case.
• Drive types: Phillips, Pozidriv, slotted, hex and Torx (supplier-specified counts per length).
• Bits are marked on the shank for identification.

• Specification

  Weight	0.411 kg
  Product Type	Impact Rated Screwdriver and Fixing Bit Set
  Number of Bits	36
  Bit Lengths	25mm, 50mm and 75mm
  Drive Profiles	Phillips, Pozidriv, Slotted, Hex and TORX
  Impact Rated	Yes
  Bit Identification	Marked Shanks
  Magnetic Bit Holder	Included
  Storage	Fitted Carry Case
  Suitable For	Impact Drivers and Compatible 1/4in Hex Bit Holders
  Phillips Profiles	PH1, PH2 and PH3
  Pozidriv Profiles	PZ1, PZ2 and PZ3
  Slotted Selection	Two Sizes in the Short-Bit Selection
  Hex Selection	Four Sizes in the Short-Bit Selection
  TORX Selection	Six Sizes from T10 to T30 in the Short-Bit Selection
  50mm Bits	PH1, PH2, PZ1, PZ2 and PZ3 Included
  75mm Bits	Extended-Reach Bits Included
  Typical Uses	Timber Fixing, Construction, Joinery, Installation, Assembly and Maintenance
  Promotion	Real Deals For You 2026 – Get Kitted Out

• Product FAQs

  Q: What is included with the Faithfull XMS26SBIT36 set? Set Contents
  A: The set contains 36 impact-rated fastening bits in 25mm, 50mm and 75mm lengths, plus a magnetic bit holder and fitted carry case.
  Q: Are these bits designed for impact drivers? Impact Driver Use
  A: Yes. The bits are impact rated and designed for fastening work with compatible impact drivers.
  Q: What bit lengths are included? Bit Lengths
  A: The set includes 25mm, 50mm and 75mm bit lengths so you can choose between close-access and extended-reach fastening.
  Q: Which drive profiles are included? Drive Profiles
  A: The set includes Phillips, Pozidriv, slotted, hex and TORX drive profiles.
  Q: Which Phillips and Pozidriv profiles are included? Phillips and Pozidriv
  A: Phillips PH1, PH2 and PH3 and Pozidriv PZ1, PZ2 and PZ3 profiles are included in the set.
  Q: What is included in the 50mm bit selection? 50mm Selection
  A: The 50mm selection includes Phillips PH1 and PH2 plus Pozidriv PZ1, PZ2 and PZ3.
  Q: What are the 75mm bits useful for? 75mm Reach
  A: The 75mm bits provide extended reach for deeper or harder-to-access fixings where the driver body cannot get as close.
  Q: Is a magnetic bit holder supplied? Magnetic Holder
  A: Yes. A magnetic bit holder is included for quick bit changes and improved fixing retention during positioning.