DeWalt 4-Piece 3.6m Ratchet Tie-Down Strap Set 31mm with Coated S-Hooks XMS26RATCHET

Product Details: Product: DeWalt 4-Piece 3.6m Ratchet Tie-Down Strap Set 31mm with Coated S-Hooks | SKU: XMS26RATCHET | Product Code: XMS26RATCHET | MPN: DXBC18004EU | GTIN / EAN: 5744006250308

The DeWalt XMS26RATCHET set gives you four 3.6m tie-down straps for securing loads during transport. The 31mm yellow webbing works with ratchet tensioners to pull the straps tight, while plastic-coated metal S-hooks connect to suitable anchor points such as tie-down rings, trailer rails and roof rack bars.

Best For Load Restraint During Transport

• Securing boxes, pallets and equipment in vans.
• Holding furniture in place during house moves.
• Restraining timber bundles on trailers or roof racks.
• Securing light garden equipment for transport.
• Keeping crates and toolboxes in place on flatbeds and trailers.

Why Choose This DeWalt Ratchet Strap Set

Four separate straps give you several tie-down points for one larger load or the flexibility to split the set across smaller jobs. Each 3.6m strap provides useful reach around bulky items, while the comfort-designed ratchet handles make tensioning easier.

Key Benefits

• Four-piece set: Includes four separate ratchet straps.
• 3.6m strap length: Gives useful reach around furniture, timber and equipment.
• 31mm webbing width: Provides a practical tie-down width for general load restraint.
• 816kg break strength: Published maximum break-strength figure for the strap set.
• 408kg lashing capacity: Published load-restraint capacity figure.
• Plastic-coated S-hooks: Clip onto suitable anchor points and tie-down rings.
• Armoured end caps: Reinforce the ratchet assemblies.
• Comfort handles: Designed to make tightening easier.

How To Use

• Check the load weight against the lashing capacity before starting.
• Choose solid anchor points such as tie-down rings, trailer rails or roof rack bars.
• Clip the S-hooks onto the anchor points and lay the webbing flat without twists.
• Feed the loose end of the webbing through the ratchet and pull out the slack by hand.
• Pump the ratchet handle until the load is held firmly in place.
• Close the handle fully to lock the ratchet and check the load again before transport.

Important Load-Restraint Guidance

• Use the 408kg lashing-capacity figure when assessing load restraint, not the 816kg break-strength figure.
• Do not use these ratchet straps for lifting suspended loads.
• Do not use them for towing a vehicle.
• Do not tie knots in the webbing or use twisted webbing.
• Inspect each strap before use for cuts, fraying or damaged hardware.
• Replace any damaged strap or ratchet that no longer locks correctly.

Storage and Care

Store the straps dry and away from prolonged direct sunlight. Keep the webbing clean, avoid sharp edges where possible and check the hooks, ratchets and webbing before each use.

• Specification

  Weight	2.337 kg
  Product Type	Ratchet Tie-Down Strap Set
  Strap Count	4
  Strap Length	3.6m / 12ft
  Strap Width	31mm / 1¼in
  Break Strength	816kg / 1800lb
  Lashing Capacity	408kg / 900lb
  Webbing Colour	Yellow
  Hook Type	Plastic-Coated Metal S-Hooks
  Ratchet Tensioning	Yes
  Handle	Comfort-Designed Ratchet Handle
  End Caps	Armoured
  Suitable Anchor Points	Tie-Down Rings, Trailer Rails and Roof Rack Bars
  Suitable For	Vans, Trailers, Roof Racks, Flatbeds, Furniture, Timber and Equipment
  Lifting Use	No
  Vehicle Towing	No
  Promotion	Real Deals For You – GET KITTED OUT

• Product FAQs

  Q: How many ratchet straps are included in the DeWalt XMS26RATCHET set? Set Quantity and Size
  A: The set contains four separate ratchet straps. Each strap is 3.6m long and 31mm wide.
  Q: What are the break strength and lashing capacity figures? Strength Ratings
  A: The published break strength is 816kg and the published lashing capacity is 408kg. Use the lashing-capacity figure when assessing load restraint.
  Q: What type of hooks are fitted to the straps? Hook Type
  A: Each strap uses plastic-coated metal S-hooks for attaching to suitable anchor points such as tie-down rings, trailer rails and roof rack bars.
  Q: What loads are these ratchet straps suitable for? Suitable Loads
  A: They are suitable for restraining items such as boxes, furniture, timber, tools and light garden equipment during transport when used with suitable anchor points and within the published lashing capacity.
  Q: How do I tighten the straps correctly? How To Tighten
  A: Lay the webbing flat without twists, attach the S-hooks to solid anchor points, feed the loose end through the ratchet, pull out the slack and pump the handle until the load is held firmly. Close the handle fully to lock it.
  Q: Can these ratchet straps be used for lifting? Lifting Use
  A: No. These straps are for load restraint and must not be used as lifting slings for suspended loads.
  Q: Can I use these straps for towing a vehicle? Vehicle Towing
  A: No. They are intended for restraining loads during transport, not for towing vehicles.
  Q: When should a ratchet strap be replaced? Inspection and Replacement
  A: Inspect the webbing, hooks and ratchet before use. Replace a strap if the webbing is cut or badly frayed, the hardware is damaged or the ratchet no longer locks correctly.