Bond It – High Gloss Block Paving Sealer for Surface Protection – 5L (BDHGBS5)

Bond It High Gloss Block Paving Sealer 5 Litre

MPN: BDHGBS5

Barcode: 5056437401366

This clear, solvent-based block paving sealer provides a durable, high-gloss protective finish for block paving, slabs, and patios.

Who This Product Is For

This sealer is for homeowners and tradespeople looking to protect and finish block paving surfaces. It suits those undertaking driveway, patio, or pathway sealing projects.

The product is appropriate for both new installations and maintenance of existing paved areas that require weather protection and colour retention.

Key Features

• Gloss Finish: Provides a high-shine appearance that shows the natural colours of paving.
• Weather Resistant: Protects against sun, rain, and temperature extremes.
• Fungicidal Properties: Prevents growth of mould and weeds.
• Stain Protection: Resists common stains including oil and petrol.

Practical Applications

Used for sealing driveways, patios, and walkways. It provides colour retention and protection for outdoor paved surfaces.

How This Fits Into a Typical Job

This sealer is applied as the final step after block paving installation or during maintenance. Surface preparation must be complete, including cleaning and joint sanding, before application.

The sealer cures to form a protective layer, after which the surface can handle foot traffic. It is part of the finishing process for outdoor paved areas.

Specifications

• Finish: High gloss
• Base: Solvent-based
• Colour: Clear
• Pack Size: 5 litres
• Application Temperature Range: 5°C to 30°C
• Drying Time: 24 hours before traffic
• Recoat Time: 4-12 hours for second coat

Application Instructions

1. Surface Preparation
   • Clear the area of loose materials and ensure joints are filled with kiln-dried sand.
   • Remove any existing stains or previous sealers.
2. Application
   • Use a brush, roller, or spray to apply an even coat. A second coat is recommended after 4-12 hours.
3. Drying Time
   • Allow the surface to cure for 24 hours before exposing it to traffic.

Not Suitable For

• Application in temperatures below 5°C or above 30°C.
• Use over existing sealers without proper removal.
• Interior surfaces or non-porous materials.
• Surfaces that are not properly cleaned and prepared.

Storage and Maintenance

• Store in a cool, dry place away from direct sunlight.
• Seal the container tightly after each use.

Order the Bond It High Gloss Block Paving Sealer today, and your outdoor surfaces will be enhanced in durability and visual appeal.

• Specification

  Weight	5 kg
  Reference Code	BDHGBS5
  Colour	Clear
  Size	5 litre
  Manufacturer	Bond It
  Type	High Gloss Block Paving Sealer
  Finish	High Gloss
  Range	Drive Alive

• Product FAQs

  Q: What surfaces can this sealer be used on?
  A: This sealer is suitable for block paving, concrete slabs, and patios, offering protection and enhancement.
  Q: How does the sealer prevent weed growth?
  A: The sealer forms a barrier between paving joints, resisting the growth of weeds and grasses and making maintenance easier.
  Q: Can this be applied over previously sealed areas?
  A: For best results, remove any old sealant before applying this product to ensure maximum adhesion and effectiveness.
  Q: Is special equipment needed for the application?
  A: No special equipment is required; it can be applied easily using a brush, roller, or spray.
  Q: What safety precautions should I take?
  A: Ensure proper ventilation during application and avoid inhaling fumes. Wearing gloves and protective eyewear is advisable.

• Downloads

  Bond It High Gloss Block Paving Sealer Main Points Sheet
  Bond It High Gloss Block Paving Sealer Technical Data sheet
  Bond It High Gloss Block Paving Sealer Safety Data sheet