Bond It – Drive Alive Clear Coat Block Paving Sealer – 4L (BDCCBS4)

Bond It Drive Alive Clear Coat Block Paving Sealer – BDCCBS4

MPN: BDCCBS4

Barcode: 5060021368300

Bond It Drive Alive Clear Coat Block Paving Sealer protects and preserves block paving on driveways, paths, and patios. It shields against water penetration and staining, helping to maintain the appearance and integrity of outdoor spaces.

Who This Product Is For

This sealer is designed for homeowners maintaining block paving surfaces on driveways, paths, and patios.

It suits jobs where protection against weather damage and staining is needed to preserve the surface condition and reduce maintenance requirements.

Key Features

• Advanced Hybrid Technology: Provides protection against environmental damage.
• Ready to Use: Simplifies the application process with no need for dilution.
• Abrasion and Chemical Resistance: Resists wear in high-traffic areas.
• Fungicidal Properties: Inhibits organic growth to keep surfaces clean.

Key Benefits

• Protects against weather-related wear and tear.
• Reduces maintenance by preventing grime accumulation.
• Helps to maintain the appearance of outdoor surfaces.
• Provides long-lasting protection.

Practical Applications

This sealer is used for sealing block paving, pathways, and patio surfaces. It provides protection against weather exposure. For best results, joints should be filled with block paving jointing sand before sealing.

How This Fits Into a Typical Job

This sealer is applied after surface preparation, which includes cleaning and removing organic growth. It forms the final protective layer before the area is returned to normal use.

The typical sequence involves cleaning the surface, applying the sealer evenly, allowing it to dry, then waiting for full curing before allowing foot or vehicle traffic.

How to Use

1. Surface Preparation:
   • Make sure paving is clean, dry, and dust-free; a masonry and patio cleaner lifts ingrained dirt.
   • Remove any existing organic growth, such as lichens.
2. Application:
   • Stir the product thoroughly before use.
   • Apply a single coat evenly using a brush, roller, or squeegee.
   • Avoid any pooling or ponding during application.
3. Drying Time:
   • Allow 3-4 hours for drying, depending on weather conditions.
4. Curing:
   • Wait until the sealer has cured before exposing the surface to traffic.

Storage and Maintenance Tips

• Store in a cool, dry place to keep the product effective.
• Make sure the container is sealed tightly after each use to prevent contamination.
• Review the product regularly for signs of wear and reapply as necessary.

Order Bond It Drive Alive Clear Coat Block Paving Sealer to protect paving surfaces.

• Specification

  Weight	5.5 kg
  Reference Code	BDCCBS4
  Colour	Clear
  Size	4 Litre
  Manufacturer	Bond It
  Type	Block Paving Sealer
  Brand	Drive Alive

• Product FAQs

  Q: What surfaces can this sealer be used on?
  A: This product is specifically designed for interlocking block paving, making it suitable for driveways, paths, and patios.
  Q: How does this product enhance the appearance of my paving?
  A: The clear coat brings out the natural colours of the blocks, giving them a refreshed and vibrant look.
  Q: Can this sealer be applied in cold weather?
  A: It is best applied in temperatures between +5°C and +30°C. Colder conditions may affect drying times.
  Q: Is it safe for use near plants and grass?
  A: Yes, the solvent-free formulation is low in odour and safe for use near vegetation when applied correctly.
  Q: How often should I reseal my paving with this product?
  A: It is recommended to reseal every 3 to 4 years to maintain optimal protection and appearance.

• Downloads

  Bond It Drive Alive Clear Coat Block Paving Sealer Safety Data Sheet
  Bond It Drive Alive Clear Coat Block Paving Sealer Technical Data Sheet